Honda B-Series AWD Shifter Cable and Bracket: Buying Guide

Quick answer

If you are building a Honda B-Series AWD setup around a B-Series AWD CR-V transmission, buy a cable and bracket kit designed for that exact configuration rather than adapting a FWD cable. The Precision Works Shifter Cable & Transmission Bracket kit is the direct-fit option here because it pairs B-Series AWD cables with a matching transmission bracket and includes Delrin inserts.

Why AWD changes the cable and bracket decision

An AWD swap moves the transmission and changes the cable path compared with a FWD B-Series layout. A cable that is the right length for a FWD chassis can end up too short, too long, or routed at a sharp bend that wears the inner liner. The bracket matters just as much: it holds the cable housing in line with the shift mechanism, so a bracket made for a different transmission case can leave the cable misaligned even when the cable itself is correct.

That is why the cable and bracket should be chosen as a pair. Buying a cable alone and reusing a bracket from another setup is the most common source of stiff, vague, or inconsistent shifting after an AWD swap.

Material and construction trade-offs

Cable construction affects feel and durability. The Precision Works cables are described as super strong and stretch resistant and made almost entirely of high strength materials, which matters in a swap where the cable runs a longer or more curved path than the factory intended. Stretch resistance helps keep shift gates consistent over time instead of drifting as the cable beds in.

The Delrin inserts are a detail worth understanding. Delrin is a low-friction acetal plastic used in bushings and inserts to reduce play and wear at connection points. Only the Precision Works cables in this listing come with Delrin inserts, so if you want to minimize slop at the cable ends, that is a reason to choose this kit over a generic replacement cable. The trade-off is that a kit built around one specific AWD configuration is less flexible if you later change transmission or chassis plans.

Fitment checks before you order

Fitment is the deciding factor, not price or brand preference. The supplied catalog lists this kit for Honda B-Series AWD all-wheel-drive setups and specifically for a B-Series AWD CR-V transmission. If your build uses a different AWD transmission case, or a FWD B-Series gearbox, this is not the right kit and you should confirm the correct cable and bracket for that application before ordering.

The catalog does not list cable length, bracket material thickness, or a chassis-by-chassis fitment chart. If your swap is a hybrid of chassis and transmission parts, treat those missing specifications as a reason to verify fitment with the seller before purchase rather than assuming the kit will fit.

Decision rules for your B-Series AWD cable and bracket

• Confirm the transmission first: If you are running a B-Series AWD CR-V transmission, this kit is the direct-fit choice. If you are running any other B-Series transmission, stop and identify the correct cable and bracket for that case before ordering. Write down your transmission code before you shop; it decides the cable, not the chassis.
• Buy cable and bracket as a set: Choose a kit that pairs the cable with a bracket designed for the same transmission. Mixing a new cable with an old or mismatched bracket is the most common cause of poor shift alignment after an AWD swap.
• Decide whether Delrin inserts matter to you: If you want to reduce play and wear at the cable ends, choose the Precision Works kit, which includes Delrin inserts. If you are replacing a cable on a stock-style daily driver and inserts are not a priority, a simpler cable may be enough.
• Verify before you commit when specs are missing: The catalog does not publish cable length or a chassis fitment chart. If your build mixes chassis, subframe, or transmission parts from different sources, confirm fitment with the seller before purchase. A five-minute fitment check is cheaper than a second cable.

Product facts

• Precision Works Shifter Cable & Transmission Bracket For Honda B-Series AWD: Complete kit includes Precision Works Shifter Cables and Transmission Bracket for B-Series AWD, with Delrin inserts. Buying the cable and bracket together removes the guesswork of matching a cable to an existing bracket, and the inserts help reduce play at the connection points.

  

Who this kit is for

Best for

• Honda B-Series AWD builds using a B-Series AWD CR-V transmission
• Owners who want cable and bracket matched as a complete kit
• Builds where reducing play at the cable ends is a priority

Not for

• FWD B-Series setups
• AWD builds using a transmission case other than the B-Series AWD CR-V unit
• Buyers who need published cable length or a chassis-specific fitment chart before ordering