How to Install Tesla Lowering Links on Model S and X

Quick Answer

Install Precision Works adjustable lowering links on your Tesla Model S or Model X by lifting the car, removing the stock links, and adjusting the new links to your desired height before reattaching them.

Installation Steps

1. Prepare the Vehicle: Park on a flat surface and engage the parking brake. Loosen the lug nuts on all four wheels, then use a jack to lift the vehicle and secure it on jack stands. Remove the wheels. Always use jack stands—never rely on the jack alone.
2. Locate the Stock Lowering Links: Identify the factory links connecting the air suspension height sensors to the suspension arms. They are typically located near each wheel. Note their orientation and attachment points. Take a photo before removal to remember the correct orientation.
3. Remove the Stock Links: Use a wrench or socket to remove the bolts securing the stock links. Carefully detach the links from both ends. Avoid forcing them; if they are stuck, apply a penetrating oil and wait a few minutes. Do not damage the sensor or wiring harness during removal.
4. Adjust the New Links: Measure the length of the stock link and set the Precision Works adjustable link to the same length initially. You can adjust later for fine-tuning. Ensure the adjustment nuts are tightened securely. Start with the stock length to avoid extreme changes in ride height.
5. Install the New Links: Attach the new links to the same points as the stock ones. Use the supplied hardware and torque the bolts to the manufacturer's specification. Reinstall the wheels and lower the vehicle. Double-check that all bolts are torqued to spec before driving.
6. Test and Fine-Tune: After lowering, check the ride height and adjust the links as needed. Take a short test drive to ensure the suspension operates smoothly and there are no unusual noises. Consider a wheel alignment. If the ride feels harsh or the suspension warning light appears, revisit the adjustment.

Product Facts

• Precision Works Tesla Adjustable Lowering Links - Model S & Model X: Precision Works Adjustable Lowering Links are designed for 2012-2020 Tesla Model S and Model X with air suspension. This ensures compatibility with your vehicle's factory air suspension system, so you can lower the ride height without replacing the entire suspension.

  

• Precision Works Tesla Adjustable Lowering Links - Model S & Model X: The links are crafted from high-strength materials with precision adjustability. This provides durability and allows you to fine-tune the exact ride height you want, maintaining a sleek look without sacrificing reliability.