Why a dedicated K-series cradle beats a moving dolly
A bare K20 or K24 block is heavy and awkward. Balancing it on a cheap moving dolly gives you no locking rotation, no stable working height, and no safe way to break torque on the crank bolt or head studs. The PLM Engine Stand Cradle is built for this job: high-strength steel, a powder-coated matte black finish, and rubber locking wheels. The catalog states it fits both Honda K20 and K24 engines, but not the K20C, and it does not mount the transmission. If you are rebuilding a K-series, this cradle gives you a stable base for assembly, cleaning, storage, and transport.
What the PLM cradle actually includes
- Private Label Mfg PLM Engine Stand Cradle - Honda K-Series K24 K20: Fits Honda K20 and K24 engines (newer version covers both). Does not fit K20C. Does not mount transmission. Confirm your engine code before ordering. K20C owners (e.g., Civic Type R, Accord) need a different solution.

Private Label Mfg PLM Engine Stand Cradle - Honda K-Series K24 K20 - Private Label Mfg PLM Engine Stand Cradle - Honda K-Series K24 K20: High-strength steel construction with powder-coated matte black finish. Steel resists flex under engine weight; powder coat protects against shop spills and scratches.
- Private Label Mfg PLM Engine Stand Cradle - Honda K-Series K24 K20: Sturdy locking wheels and included hardware. Locking casters keep the stand stationary while you torque bolts; hardware means you can assemble without a trip to the parts store.
Install the PLM cradle on your K20/K24 block
- 1. Verify engine code and transmission status: The cradle fits K20 and K24 engines but not the K20C. It does not mount the transmission, so remove the gearbox before installation. If you have a K20C, stop here—this part is not for you.
- 2. Position the block on a stable lift or bench: With the engine out of the car, set it on a sturdy surface. The PLM cradle is designed to hold the block while you install or remove parts, so you will be working around it. Have a helper for the initial lift.
- 3. Attach the cradle to the engine block: Use the included hardware to bolt the cradle to the block's engine-stand mounting points. The catalog does not specify torque values or bolt sizes, so follow your factory service manual for the block-side fasteners. Do not guess critical torque.
- 4. Lock the wheels before applying torque: Once the engine is on the cradle, engage the rubber locking wheels. This prevents rolling when you break loose the crank bolt, head bolts, or motor mounts. The locking feature is a key safety advantage over a plain dolly.
- 5. Use the cradle for assembly, cleaning, and storage: The PLM cradle makes it easy to install or remove parts during a rebuild, clean the block, and store or transport the engine. Keep the wheels locked whenever you are working on the engine, and unlock only to move it.
Fitment checkpoints before you buy
The PLM cradle is a direct-fit solution for most K20 and K24 engines, but two exclusions matter. First, it does not fit the K20C—that includes engines from the Civic Type R and some Accord models. Second, it does not mount the transmission, so you cannot use it to support a full engine-and-gearbox assembly. If you need to work on the transmission attached, this cradle is not the right tool.
Also note that the catalog does not list a weight capacity or specific bolt torque for the cradle-to-block connection. That is not a red flag—many engine stands rely on the factory mounting points—but it means you should consult your Honda service manual for the block-side fastener torque. Use the included hardware and check that all bolts thread in smoothly by hand before tightening.
PLM cradle vs a generic engine stand
- Stability: PLM uses high-strength steel and locking wheels; a generic stand may have only a rotating head and no wheel locks.
- K-series specific fit: PLM cradle is designed for K20/K24 block mounting points; generic stands often require universal adapter plates that can flex.
- Mobility: PLM cradle rolls on rubber locking wheels; many engine stands have small steel casters that can mar floors and roll freely.
- Transmission support: Neither the PLM cradle nor most engine stands mount the transmission—remove it first.


