Precision Works Engine Mount Kit for Civic FG: What to Know
By Aftermarket Car Parts -Private Label Mfg | Published: 2026-10-26
Category: Buying Guides
Learn what the Precision Works engine mount kit for the 2006-2011 Civic FG offers, its trade-offs, and whether it's the right upgrade for your driving needs.
Quick Answer
If you drive a 2006-2011 Civic FG and want to reduce wheel hop and improve launch traction, the Precision Works engine mount kit is a proven, value-focused upgrade—but be ready for added vibration and cabin noise.
Why Consider an Engine Mount Upgrade
Factory engine mounts are designed for comfort, not performance. Under hard acceleration, the engine can shift, causing wheel hop and loss of traction. Replacing the soft rubber mounts with stiffer urethane units helps keep the drivetrain planted.
The Precision Works kit uses 70A durometer urethane bushings—a common stiffness level that balances performance with daily drivability. It's a popular choice because it's noticeably firmer than stock without being as harsh as solid or 90A mounts.
The Vibration Trade-Off
Any stiffer mount will transmit more engine vibration into the cabin, especially at idle. The 70A durometer rating means you'll feel some extra buzz, but it's generally tolerable for most drivers. If you're sensitive to NVH (noise, vibration, harshness), this is a factor to weigh.
For a daily driver, the added vibration might be annoying in stop-and-go traffic. For a weekend toy or track car, the improved traction and reduced wheel hop usually outweigh the comfort loss.
Fitment and Compatibility
The Precision Works kit is designed for the Honda Civic 2006-2011 FG chassis, which includes the Si, FD2, FA, and FG models. It's a direct replacement for the factory mounts, so no modification is needed for installation.
If you have a K-swap or a different chassis, this kit won't fit. Check your vehicle's exact model and year before ordering to avoid compatibility issues.
Decision Rules for Choosing This Kit
- If you want better launch traction: This kit is designed to eliminate wheel hops and improve launch times. If you frequently drag race or launch hard from a stop, it's a solid upgrade. Expect a noticeable improvement in traction during hard launches.
- If you daily drive your Civic: Be prepared for increased vibration and cabin noise, especially at idle. If you're not ready for that, consider a less aggressive mount or stick with stock. Test your tolerance for NVH before committing.
- If you have a non-FG Civic: This kit only fits 2006-2011 Civic FG models. For other chassis, look for a kit specifically designed for your car. Verify your exact model and year before purchasing.
Product Facts
- Precision Works Engine Mount Kit - Civic 2006-2011 FG: Precision Works Engine Mount Kit for Honda Civic 2006-2011 FG features billet 6061-T6 aluminum construction and 70A durometer urethane bushings. The aluminum body adds strength while the 70A urethane bushings provide a firm but street-friendly stiffness that helps reduce wheel hop without making the car unbearable for daily driving.
Precision Works Engine Mount Kit - Civic 2006-2011 FG
Who Should Buy This Kit?
Best for
- Owners of 2006-2011 Civic FG who experience wheel hop and want improved launch traction
- Drivers who prioritize performance over comfort and don't mind extra vibration
Not for
- Drivers who use their Civic as a pure daily commuter and are sensitive to vibration and noise
- Owners of other Civic generations or models that don't match the FG chassis
