Quick answer
The Precision Works rear engine mount is a direct bolt-on upgrade for 2019-2024 Acura RDX owners who want to limit engine movement, especially with an aftermarket downpipe or front pipe. If your RDX is stock and you prioritize a quiet cabin, keep the factory mount.
Why the rear mount matters on a modified RDX
The rear engine mount, often called a torque damper, controls how far the engine rocks under load. When you add a downpipe or front pipe, the increased exhaust flow can amplify that movement, leading to extra vibration and stress on the factory mount. Precision Works specifically notes this mount is a must-have with those modifications, so it is worth planning the mount alongside exhaust work rather than after.
Even on a stock RDX, a worn factory mount can cause clunks or excessive engine shake. This billet aluminum replacement is designed to be firmer than the original, which reduces movement but also transfers more vibration into the cabin. That trade-off is the main decision point.
Fitment check: which RDX this mount fits
This mount is listed for the third-generation TC1/TC2 chassis, covering 2019 through 2024 Acura RDX models. It replaces the top rear engine bay mount only, not the side or transmission mounts. If you are unsure which mount is worn, inspect all mounts before ordering, because replacing only the rear mount may not solve a noise that comes from elsewhere.
The mount is a direct bolt-on, so no fabrication is required. However, the catalog does not list a specific durometer or stiffness rating, so you cannot compare it numerically to other mounts. Use the supplied fitment years and chassis code as your primary guide.
Vibration trade-off: what to expect
A firmer billet mount reduces engine movement but typically increases vibration felt through the steering wheel, seats, and floor, especially at idle. How much varies by vehicle and condition of other mounts. If your RDX is a daily driver and you are sensitive to cabin noise, this may be too aggressive. If you already tolerate stiffer suspension or exhaust modifications, the added vibration is usually acceptable.
The catalog does not specify whether this mount includes a polyurethane bushing or a solid billet design beyond the material description. That means you should not assume a specific comfort level; instead, decide based on your tolerance for increased NVH (noise, vibration, harshness) and your reason for upgrading.
Decision rules for buying the Precision Works rear mount
- If you have an aftermarket downpipe or front pipe: Choose this mount. Precision Works states it is a must-have to prevent excessive engine movement with those modifications. Pair the mount with your exhaust upgrade for the intended benefit.
- If your RDX is stock and you want a quiet cabin: Keep the factory mount. A firmer billet mount will likely increase idle vibration, and the catalog does not claim otherwise.
- If you are replacing a worn mount: Confirm the rear mount is the source of the clunk or movement. Inspect side and transmission mounts too, because this part replaces only the top rear mount. Order only after verifying the worn location.
- If you are unsure about fitment: Check that your RDX is a 2019-2024 model on the TC1/TC2 chassis. The catalog does not list other generations or models as compatible.
- If you are sensitive to NVH: Do not buy this mount expecting stock comfort. The catalog provides no stiffness rating, so there is no guarantee it will feel close to factory. Consider your tolerance before ordering.
Product facts
- Precision Works Rear Engine Mount 2019 - 2024 Acura RDX: Precision Works billet aluminum rear engine mount for 2019-2024 Acura RDX (TC1/TC2 chassis). Confirms the exact generation and mount location, so you can verify it matches your RDX before ordering.

Precision Works Rear Engine Mount 2019 - 2024 Acura RDX - Precision Works Rear Engine Mount 2019 - 2024 Acura RDX: Direct bolt-on replacement for the rear engine mount (torque damper). No custom fabrication is needed, which keeps installation straightforward for a DIYer or shop.
- Precision Works Rear Engine Mount 2019 - 2024 Acura RDX: Precision Works recommends this mount as a must-have if you have an aftermarket downpipe and/or front pipe. If you have those exhaust modifications, this mount addresses the extra engine movement they can cause.
Who should buy this mount
Best for
- 2019-2024 Acura RDX owners with an aftermarket downpipe or front pipe
- Drivers who want to reduce engine movement and accept some added vibration
Not for
- Stock RDX owners who prioritize a quiet, smooth cabin
- Owners of RDX models outside the 2019-2024 TC1/TC2 range


