UEL vs EL vs stock on the FA20: the real decision
If you drive a BRZ, FR-S or 86 with the FA20 engine, the header choice comes down to three practical paths: keep the stock manifold, fit an unequal-length (UEL) header, or fit an equal-length (EL) header. The PLM Power Driven UEL FA20 header is a direct bolt-on replacement aimed at low-to-mid power and the classic boxer rumble. EL headers are a different design, and the supplied catalog does not include an EL product record or EL dyno figures, so this comparison treats EL as a category rather than a specific part.
Use the evidence you have rather than assumptions. The PLM listing gives a specific customer dyno result and a clear fitment statement for the FA20 BRZ, FR-S and 86. What it does not give is a back-to-back test against an EL header, a stock baseline, or installation instructions. That shapes how you should read every claim below.
How the three options compare on paper
- Stock FA20 manifold: The baseline. The PLM header is described as a direct bolt-on replacement for the stock manifold and bolts up to the stock over-pipe location. No stock power figures are supplied, so treat any gain as relative to your car's current condition.
- PLM Power Driven UEL header: True 4-1 merge collector, revised V2 design with bellow joints for leak-free long-term durability, one-piece design for engine-bay space. An independent customer dyno is cited at +28 whp and +14 tq with no more torque dip. This is the only header with supplied numbers in this comparison.
- EL header (category only): Equal-length designs are a separate category. The supplied catalog does not include an EL header record, dimensions, dyno results, or sound description, so no performance or sound comparison can be made from the evidence here. Confirm those details with the EL product listing before buying.
What the PLM Power Driven UEL header record confirms
- PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header: Independent customer dyno has shown to gain +28 whp and +14 tq, and with no more torque dip. This is the only quantified power claim in the supplied evidence, and it is a customer dyno result, not a manufacturer test. Use it as a directional data point, not a guarantee for your car.

PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header - PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header: Revised V2 design now utilizes the bellow joints for a 100% leak-free long term durability. Leak-free durability is a real ownership concern on a header. The bellow joints are the specific design feature the listing credits for it.
- PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header: Integrates a true 4-1 merge collector. The 4-1 collector is the core design fact behind the UEL layout. It explains why this header is aimed at low-to-mid power rather than top-end scavenging.
- PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header: The UEL header delivers low to mid end power while utilizing an one piece design which maximizes the engine compartment space & a direct bolt on replacement for your stock manifold. This is the clearest statement of what the part changes and how it installs: low-to-mid focus, one-piece construction, and stock-location bolting.
- PLM Power Driven FR-S BRZ 86 GR86 UEL FA20 Unequal Length Header: The header will bolt up to the stock location to the over pipe. This is the fitment checkpoint that matters most before ordering. It confirms the connection point but does not list every gasket, stud or clearance requirement.
The sound question: what a UEL header actually changes
The classic reason people choose a UEL header on an FA20 is the exhaust note. Unequal-length primaries create the pulsing, uneven exhaust rhythm that gives the boxer its characteristic rumble. The PLM listing does not include a sound clip, decibel figures, or a comparison to an EL or stock note, so any description of the sound is a general characteristic of the UEL layout, not a measured claim about this specific part.
An EL header, by design, tends to produce a more even, higher-pitched note. Again, the supplied catalog does not include an EL product or sound data, so treat that as a category-level expectation to verify with the EL listing. If sound is your main reason for buying, confirm the tone with the seller or a reliable recording of the exact part before you commit.
Fitment checkpoints before you order
The PLM record gives a clear application and connection point, but it does not list every vehicle-year nuance, gasket, or clearance requirement. Check these points against your car and the listing.
- Confirm your engine and chassis: The listing names the FA20 engine and the FR-S, BRZ and 86. Confirm your car matches that engine and platform before ordering, and check the listing for any year or trim notes.
- Confirm the over-pipe connection: The header bolts up to the stock over-pipe location. If your car has an aftermarket over-pipe or a different exhaust layout, verify compatibility with the seller rather than assuming it fits.
- Ask about gaskets and hardware: The supplied evidence does not state whether gaskets or studs are included. Ask before you buy so you are not left short during installation.
- Plan for professional installation: The catalog does not supply installation steps or torque values. Header replacement involves exhaust fasteners and sensor placement, so have a qualified shop handle the work unless you have the tools and experience.
Who the PLM UEL header suits, and when to look at EL instead
The PLM Power Driven UEL header is a strong fit if you want a direct bolt-on replacement for the stock FA20 manifold, care about low-to-mid power and the UEL sound, and value the revised V2 bellow joints for long-term leak resistance. The listing also positions it for autocross, drag racing and road racing use, and the catalog price of USD 464.38 against a USD 749.00 comparison price makes it a value-oriented choice.
An EL header becomes the better comparison if your priority is a different exhaust note or a design aimed at a different power band. Because the supplied evidence contains no EL product record, dyno data, or sound comparison, this article cannot tell you which makes more power or sounds better. What it can tell you is that the PLM UEL header is the option with documented fitment and a specific customer dyno result. For the EL path, read that product's own listing and ask for comparable evidence before deciding.


