Start with the vehicle, not the sound clip
The PLM Power Driven exhaust is listed for 2015–2019 Polaris Slingshot models with the 2.4-liter Ecotec inline engine. That model-year and engine note is the first checkpoint: if your Slingshot falls outside that range or runs a different engine, the supplied catalog does not confirm fitment, and you should verify before ordering.
The package includes both the exhaust and the header/manifold, so you are changing the full path rather than just the rear section. That makes fitment and installation planning more important than on a simple axle-back swap.
What the catalog confirms about this exhaust
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: For 2.4 liter Ecotec inline engines, 2015–2019 models This is the compatibility boundary; confirm your Slingshot matches before purchase.

PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold - PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Made from 304 stainless steel Material affects long-term durability and how the system handles heat cycles.
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Includes exhaust and header/manifold You are replacing both sections, so plan for header access and exhaust routing together.
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: CNC machined manifold flanges, 1/2 inch flange Flange type and thickness matter for sealing and for matching the cylinder head surface.
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Collector is 2.5" This is the collector size stated in the catalog; use it when checking connections to the rest of the system.
How the three silencer fittings change the tone
The exhaust comes with three silencer fittings so you can adjust the tone to your liking. The catalog does not publish a decibel chart or describe which fitting is quietest, so treat the fittings as a tuning range rather than a guaranteed sound profile. Start with one fitting, drive the car through a range of rpm and load, then swap to another if the volume or character is not what you want.
Because the system also includes an anti-reversion chamber to reduce unwanted exhaust gases traveling backward, the tone you hear is the result of the full package, not just the silencer insert. Change one variable at a time so you can judge what each fitting actually does.
Install checkpoints before you turn a bolt
- Verify the model year and engine: Confirm your Slingshot is a 2015–2019 model with the 2.4-liter Ecotec inline engine. The catalog does not list other applications.
- Inspect the flange and collector: The manifold uses CNC machined flanges with a 1/2 inch thickness, and the collector is listed at 2.5". Check these against the surfaces and connections on your car before assembly.
- Plan for the O2 sensor bungs: The system has dual O2 sensor bungs. The extra bung can be used with a wideband or other tuning O2 sensor. Decide which sensor goes in which bung before you install the header.
- Test-fit the silencer fittings: Try each of the three fittings during mock-up so you know how they seat and how much access you have for changes later.
- Check header-to-exhaust connection: The catalog states OEM fitment can be used with the stock manifold/header or an aftermarket exhaust system. Confirm how your chosen combination joins before final tightening.
What the listing does not tell you
The supplied information does not include torque specifications, tightening sequences, gasket part numbers, or a step-by-step removal procedure. Those details should come from the vehicle manufacturer or the instructions included with the parts. Do not guess critical fastener torque or sequence.
It also does not state whether the system is emissions-legal in your region or how it affects inspection. Check local regulations before installing a header and exhaust that replace emissions-related components.
Construction details that affect installation
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Professionally TIG welded and assembled Welded construction means fewer clamped joints to leak, but it also means the header and exhaust sections are fixed shapes.
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Ported runner and collector for better flow Ported internal passages are intended to improve flow; this is a design feature, not a guaranteed power number.
- PLM Power Driven Polaris Slingshot Exhaust with Adjustable Silencers & Header / Manifold: Anti-reversion chamber to eliminate unwanted exhaust gases traveling backwards This chamber is part of the sound and flow design, so it affects what you hear when tuning the silencers.
Tuning the sound after installation
Once the system is installed and checked for leaks, use the three silencer fittings to dial in the tone. Make one change at a time and note the result at idle, cruise, and wide-open throttle. The catalog does not specify which fitting produces which sound level, so your ear and your local noise rules are the guide.
If you plan to use the extra O2 bung for a wideband sensor, confirm the sensor and gauge are compatible with the bung before installation. The catalog does not list bung thread size, so check the sensor manufacturer’s specification against the fitting.
Warranty and long-term ownership
The catalog lists a one-year warranty. Keep your purchase record and follow the installation and care guidance supplied with the product. Stainless steel construction helps resist corrosion, but the catalog does not provide a cleaning schedule or specific care products, so follow general stainless exhaust care and inspect the system periodically for loose fittings or leaks.


