What This Spray Plate Does
The Precision Works K-Series RBC PRB Nitrous Spray Plate V2 is designed to add nitrous oxide to your K20 or K24 engine without drilling into the intake manifold or intake tube. It sits between the throttle body and the manifold, creating a sealed port for nitrous delivery. This is a common upgrade for Honda K-series builds looking for a clean, reversible installation.
Key Specifications from the Catalog
- Precision Works K-Series K20 K24 RBC PRB Nitrous NOS Spray Plate V2 70-74mm: V2 now fits 70mm to 74mm (bore is 70mm.) This tells you the plate matches throttle bodies in that size range, which covers many aftermarket RBC and PRB manifold setups.

Precision Works K-Series K20 K24 RBC PRB Nitrous NOS Spray Plate V2 70-74mm - Precision Works K-Series K20 K24 RBC PRB Nitrous NOS Spray Plate V2 70-74mm: Fits both patterns found on RBC and PRB K Series intake manifolds. You don't need a specific manifold version; the plate works with both common K-series manifold patterns.
- Precision Works K-Series K20 K24 RBC PRB Nitrous NOS Spray Plate V2 70-74mm: Accepts all brands of nitrous jets and allows for a dual stage dry shot or single stage wet shot. It gives you flexibility in how you set up your nitrous system, whether you want a simple single stage or a more complex dual stage.
- Precision Works K-Series K20 K24 RBC PRB Nitrous NOS Spray Plate V2 70-74mm: Instruction is not included - we provide installation support! Be prepared to rely on external guidance or contact the seller for help; the plate doesn't come with a printed manual.
Fitment Check Before You Buy
The plate is designed for RBC and PRB intake manifolds used on K20 and K24 engines. It fits throttle bodies with a 70mm to 74mm bore (the plate bore is 70mm). If your throttle body is outside that range, the plate won't seal correctly. Also, because the plate fits both RBC and PRB bolt patterns, it should match most aftermarket manifolds that follow those designs.
The catalog does not confirm compatibility with every K-series variant or other intake manifold types. If you're running an aftermarket manifold that isn't RBC or PRB, check the bolt pattern and throttle body bore size against the plate's specifications before ordering.
What the Catalog Does Not Tell You
The listing confirms the plate accepts all nitrous jet brands and supports both dry and wet shots, but it does not specify the exact jet sizes or nitrous/fuel pressure settings you should use. Jet size depends on your fuel pressure and bottle pressure, as noted in the product record. You'll need to tune your nitrous system based on your engine's setup.
Installation instructions are not included, though the seller offers support. If you're new to nitrous systems, plan to have a knowledgeable friend or a shop assist. The plate itself is straightforward to install, but proper jetting and safety checks are critical.
Is This Plate Right for Your Build?
If you have a K20 or K24 with an RBC or PRB intake manifold and a 70-74mm throttle body, this plate is a direct-fit option that avoids drilling into your manifold. It's suitable for both mild and more aggressive nitrous setups, thanks to its dual-stage support. The main trade-off is the lack of included instructions, which means you'll need to source guidance elsewhere or rely on the seller's support.
For builders who want a clean, reversible nitrous installation on a K-series, the Precision Works V2 plate is a practical choice. Just verify your throttle body bore and manifold pattern before purchase.


