Back to Blog
Buying Guides 2026-11-16 Aftermarket Car Parts -Private Label Mfg 6 views

PLM Universal Side Mounts for 2 Racing Seats: Buying Guide

PLM Universal Side Mounts for 2 Racing Seats: Buying Guide

A practical guide to PLM universal side mounts for two racing seats: what the kit includes, which sliders and seats it suits, and the fitment limits to check before ordering.

What the PLM two-seat kit actually gives you

If you are mounting two side-mount racing seats, the PLM Universal Side Mounts are sold as two complete sets of brackets — one set per seat. That matters because many listings price a single bracket pair, so you would need to buy twice. Here the quantity is already matched to a two-seat build.

The brackets are made from high-strength steel. PLM states they will not bend or warp with heat, while other brackets can be bent by hand. That stiffness is the main reason to consider them over a generic set, especially if you plan to run the seats hard or leave the car in a hot climate.

Catalog facts behind the two-seat decision

  • PLM Universal Side Mounts - Fits 2 Racing Seats: Two (2) sets of side mount brackets are included, enough for two side-mounted racing seats. Confirms the kit covers both seats in one order, so you are not short a pair.
    PLM Universal Side Mounts - Fits 2 Racing Seats
    PLM Universal Side Mounts - Fits 2 Racing Seats
  • PLM Universal Side Mounts - Fits 2 Racing Seats: The brackets are made from high-strength steel and are described as stronger and more durable than other brackets. Steel construction is the basis for the heat and stiffness claims, so it is worth checking against your intended use.
  • PLM Universal Side Mounts - Fits 2 Racing Seats: Pre-drilled slots are designed for sliders from most major aftermarket seat manufacturers such as SPARCO, RECARO and BRIDE. This is the compatibility hook: the mounts are intended to work with common aftermarket slider patterns, not factory seats.

The fitment line you cannot ignore: no factory seats

The listing is explicit: these mounts do not work with factory seats. They are for side-mounted racing seats, where the bracket bolts to the side of the seat shell rather than to a factory base. If you are trying to adapt an OEM seat, this is the wrong part regardless of how the slots line up.

The other fitment detail to plan around is the slider. The pre-drilled slots are intended for sliders from most major aftermarket seat manufacturers, including SPARCO, RECARO and BRIDE. The word “most” is doing real work here — it is not a guarantee for every slider on the market. Check the bolt pattern and slot spacing of your specific slider before ordering, because the supplied information does not list exact dimensions.

What to confirm before you buy

Use this as a pre-order checklist. Each point comes from the catalog or from what the catalog leaves open.

  • Seat type: Your seats must be side-mounted racing seats. Factory seats are explicitly not supported.
  • Slider brand and pattern: The slots are made for sliders from most major aftermarket manufacturers such as SPARCO, RECARO and BRIDE. Confirm your slider is one of them rather than assuming.
  • Bracket dimensions: Exact slot spacing, height and width are not given in the supplied information. Measure your seat and slider before ordering if you need a precise fit.
  • Installation hardware and torque: The listing does not include bolt sizes, torque figures or step-by-step installation instructions. Plan to source hardware and follow the seat and slider manufacturers’ guidance.

PLM steel mounts vs generic hand-bendable brackets

The trade-off is straightforward: stiffness versus weight and cost.

  • PLM high-strength steel: Resists bending by hand and is stated not to warp with heat. Heavier than some alternatives, and priced as a two-seat kit rather than a single pair.
  • Generic brackets: Can be bent by hand and may warp with heat according to the PLM listing. Likely lighter and cheaper, but less reassuring for a performance seat installation.

Price and availability: what the listing says

The catalog shows a price of USD 66.33 against a comparison price of USD 99.00, with a note that the lower price is subject to change. Treat that as a current listing detail rather than a permanent discount. If the two-seat quantity is what you need, the kit avoids buying two separate pairs, but confirm the price at checkout.

The listing also says “order it now,” which is sales language rather than a technical claim. The practical takeaway is simply that availability and pricing can move, so verify before you plan a build around it.

Who this kit suits — and who should keep looking

This kit suits a two-seat build using side-mounted aftermarket racing seats and sliders from major brands such as SPARCO, RECARO or BRIDE. It also suits anyone who wants a stiffer steel bracket and is willing to accept the extra weight and the need to confirm slot dimensions themselves.

It does not suit factory seats, and it is not a universal answer for every slider on the market. If you need exact dimensions or a complete installation kit with hardware and torque specs, the supplied information does not provide them — you will need to measure and source those details separately.

Related Articles

Customer Service
Home
Products
Cart
Profile